Breckland Scientific 2021 Catalogue

Water Purification

Water Purification

a

1

1 DEIONISER - ELGASTAT B114 The B114 wall mounted deionisation system can produce up to 30L/hr of high purity water for a wide range of laboratory and general manufacturing applications. The deioniser is a cost-effective stand-alone system that provides low to medium volumes of primary or deionised grade water. Water quality is easy to monitor, with a colour coded resistivity indicator displaying treated water quality. Supplied with 4 cartridges. Please note: the volume of deionised water produced from each cartridge can vary greatly, from approx. 20 to 250L, depending on the hardness and amount of dissolved minerals/ ions of the input water supply. Cat No. Description Price Per WAT-200-100 Deioniser Elgastat B114 715.34 ea. WAT-200-150 Cartridges for Deioniser Elgastat B114 123.87 4 BAT-100-100 PP3 Battery 2.55 ea. 2 WATER STILL - MERIT The Merit is the ideal choice for budget conscious laboratories that can’t afford to compromise on quality. It combines economy and high performance with a host of other features which comparable stills cannot match. Built in acid addition funnel and drain stopcock allow easy descaling without dismantling the glassware. The unique condenser design ensures that the droplets of distilled water remain in contact with the cooling coil for the longest possible time producing cold distilled water and pre-heating the boiler feed to increase efficiency. Screwthreads are incorporated on all water connections so hoses can be fitted and removed easily and safely without risk of breakage. Safety features include two independent safety thermostats to prevent over heating in the event of failure of the water supply. The stand is pre-drilled to facilitate wall mounting. Ouput: 4 litres/hr, single distilled. Overall size (W x D x H) 470 x 150 x 440mm. 220/240V. PLEASE NOTE: Not supplied with 13A plug, as unit must be hard wired to mains supply via a 30mA RCD with over-protection and continuous current carrying capacity of 15A at 250V. Cat No. Description Price Per WAT-300-100 Merit Water Still 911.45 ea. WAT-300-150 Merit Water Still Replacement Boiler 232.94 ea. WAT-300-200 Merit Water Still Heating Element 3kW 418.95 ea. WAT-250-200 Water Still Spare Condenser 404.50 ea. 3 WATER STILL - DISTINCTION 4000 All glass construction with silica sheathed heaters ensures top purity distillate at an economical price. Fitted with a control device to turn off the heater when the collecting reservoir is full. Prevents overflow if the still is inadvertently left switched on when unattended. With two independent safety thermostats to prevent over heating in the event of an interruption to the water supply. The unique condenser design ensures that the droplets of distilled water remain in contact with the cooling coil for the longest possible time producing cold distilled water and pre-heating the boiler feed to increase efficiency. Screwthreads are incorporated on all water connections so hoses can be fitted and removed easily and safely without risk of breakage. Built in acid addition funnel and drain stopcock allow easy de-scaling without dismantling the glassware. The stand is pre-drilled to facilitate wall mounting. Output: 4 litres/hr, single distilled. Overall dimensions (W x D x H) 540 x 160 x 410mm. 220/240V. PLEASE NOTE: Not supplied with 13A plug, as unit must be hard wired to mains supply via a 30mA RCD with over-protection and continuous current carrying capacity of 15A at 250V. Cat No. Description Price Per WAT-250-100 D4000 Still 1535.24 ea. WAT-250-150 D4000 Water Still Spare Boiler 517.35 ea. WAT-250-200 Water Still Spare Condenser 404.50 ea. WAT-250-250 Water Still Spare Heater 176.10 ea.

b

c

d

e

f

g

h

i

Deioniser - Elgastat B114

2

j

k

l

m

n

o

Water Still - Merit

3

p

q

r

s

t

Water Still - Distinction D4000

v

Related Products... For deionised water see page 59

w

478

Value | Service | Expertise